[RECOVERY][6.0.5.1] ClockworkMod Recovery for WeTek Play

[Joregas]

[RECOVERY][6.0.5.1] ClockworkMod Recovery for WeTek Play

Install instructions



* Power off your device and unplug the AC power cord.
* Download the recovery zip (below you will find the up to date version).
* Unzip the downloaded zip (you can delete the META-INF folder).
* Copy the downloaded zip and the freshly unzipped recovery.img to a MicroSD card.
* Now insert the MicroSD card in your STB.
* Plug the AC power cord while you keep pressed the little reset pinhole (located on the bottom of the device) for 10 seconds (just count slowly to ten and it will be good).
* The device should have booted to CWM recovery.



You can use the remote or a USB keyboard (if it was plugged in before you booted to recovery, it's not plug & play while in recovery) to navigate in the various menu entries.



If you wanna flash CWM to your NAND storage you can flash the downloaded zip from "Install zip" menu entry (choose "from /external_sd" sub-menu since the zip is on the MicroSD).
Now the STB will boot to CWM even if you remove the MicroSD or if you delete recovery.img from it.